Why GreenWorx is Best
GreenWorx is the only industrial lighting control system available that gives you the best of both worlds: Ballast-Level Control with No New Wires!
Ballast-Level Control
Many lighting control systems provide only Circuit-Level control – an
entire circuit (string) of light fixtures is controlled (on or off) as
a single unit. For most energy savings situations – like Daylight Harvesting,
Time-of-Use, and Zoned Control – this is simply not good enough. To gain
maximum benefits you need to control exactly the fixtures you want without
regard for how they may have been circuited.
Fixture-Level control is the next step up in being able to fine tune
the lighting control system. There are systems on the market today that
provide this type of control but they require a messy new set of wires
and control modules to be added to each fixture. This is expensive and
not very conducive to retrofit. GreenWorx not only provides Fixture-Level
control but it also offers Ballast-Level control – each ballast of every
fixture can be individually controlled – giving it the finest level of
control available. Best of all, GreenWorx does not require any new wires
to be strung throughout the building.
No New Wires
You already have electrical wires providing power to each light fixture.
Why go through the expense and hassle to add even more wires for lighting
control? With GreenWorx you don’t have to!
GreenWorx utilizes the same power wires that already exist to send control
signals to each light fixture. Simply install Fixture Control Modules
in each light fixture and the System Controller at the circuit breaker
panel and you’re ready to go. Add keypads and photo-sensors to the system
just as easily – just hook them to the existing power wires.
