simpleworx-webheader

Plug-In Module Relay - 120V Output (PMR-AC)

Plug-In Module Relay - 120V Output (PMR-AC)

The Plug-in Module Relay AC is a remote on/off switch which can be controlled from any SimpleWorx transmitter without the need for control wires. Controlling plug-in loads, such as landscape lighting transformers, water features, televisions, small motors, pumps , appliances up to a 15A load or lamps up to 800Watts has never been simpler.

The Plug-in Module Relay AC is a remote on/off switch which can be controlled from any SimpleWorx transmitter without the need for control wires. Controlling plug-in loads, such as landscape lighting transformers, water features, televisions, small motors, pumps, appliances up to a 15A load or lamps up to 800 Watts has never been simpler.
Set-up is accomplished by pushing a button for 6 seconds on each device, within 20 seconds they are Linked.


One, two, three you’re done!

Features

  • 15A or 800W of ON/OFF control
  • Simple installation, just plug it in to any grounded 120V outlet
  • Controllable from eight Transmitters; no control wiring 
  • Links to SPC Transmitters in seconds
  • LED indicates status of relay 
  • Power failure restore to last state
  • 5 Year Warranty

Technical Specs

 

ELECTRICAL

Power Requirements

Primary: 120 Volts AC, 50/60Hz Single Phase

Neutral Wire

Required

Channels  One
Switch Load Types  Standard inductive loads up to 15A and incandescent loads up to 800W
Relay Lifetime 100,000 on/off operations at full electronic ballast load

Max Load

15 Amps @ 120V AC 50/60 Hz

Standby Power Consumption 

< .8 Watts

Environmental Conditions

Indoor Use Only

Temperature: -40° to 140°F (-40° to 60°C)

Humidity: 10% to 90% RH (non-condensing)

Certifications

Safety tested for USA and Canada ETL tested to UL508

UL-508-2010  CSA C22.2 #14-2010

OPERATION

Status LED Modes

Red = Operation Mode

Blinking Green = Link Mode

Blinking Red = Transmitting

During Power outage

Retains all settings in Non-volatile EERPOM

MECHANICAL

Set Button

Button

Mounting

3-pin grounded outlet

Dimensions

Length: 3.0 in Width: 2.0 in Depth: 1.55 in

Weight

.3 oz.

Warranty

5 years

US Patent No.

6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

MODE DESCRIPTIONS

Normal

Power Is applied to device

Link

Press and Hold Rocker or Button for >6 sec.

Link Exit

Tap while in Link Mode

Test Mode

5 taps while in NORMAL Mode of a Transmitter

TEST Mode Exit

1 tap while in TEST Mode

Signal Strength Mode

6 taps while in NORMAL Mode of a Receiver

Noise Strength Mode

7 taps while in NORMAL Mode of a Receiver

Factory Default

10 taps while in LINK Mode

LED INDICATOR STATUS

Red

Normal Mode Power Applied

Blinking Green

Link Mode

Flashes Green

Transmitting

Dark/Green

Test Mode

Pulses Green 1-16X

Same Phase/ Signal Strength  Display Mode of a Receiver

Pulses Red 1-16X

Opposite Phase / Signal Strength  Display Mode of a Receiver

Pulses Orange 1-16x

Relative Noise Strength at Receiver

Blinks Red 10x

Indicates that device has been factory defaulted

Wiring Diagram

 PMR Wiring Diagram

Resources

CLICK ICON TO VIEW OR DOWNLOAD

 

News Feed

  • Powerline Control Systems Releases UPStart Version 7.0

    Sep 5, 2014

    Read More...

  • Powerline Control Systems Introduces Load Capable Seven Button Keypads

    Sep 2, 2014

    Read More...

  • Powerline Control Systems Introduces SimpleWorx Just Try It Kits

    Jun 5, 2014

    Read More...

Associations

associations

CEA CEDIA

Awards

awards