Transmitters are the interfaces to any SimpleWorx system and are available in a variety of styles; keypads, wall switches, plug-in, fixture and flatpac versions. Certain versions switch a lighting load and provides control to other SimpleWorx receiver devices. Most transmitters are capable of switching a full 20 A circuit, and the robust design enables it to endure even the most severe inrush environments. A TX will talk to as many RX units that are installed.
The SimpleWorx Digital Astronomical Timer (DAT) features four timers, each which can be set for a specific time of day, dusk, with an offset (before or after dusk) or at dawn, with an offset (before or after dawn)
Keypads provide control of four groups of SimpleWorx receivers anywhere in your home or office. Each group can have one or multiple receivers.
SimpleWorx Wall Switches replace existing switches, and provide fingertip, local control of present lighting, while adding the capability of controlling other SWX receivers.
Plug-in style module is available with a single contact closure input. It also has a 12VAC ouput to power sensors. The input can be connected to any Class 2 low-voltage devices such as contact switches, motion sensors, photo sensors, etc. to control other SWX receivers.
Fixture Modules are small wire-in self contained devices which are an ideal solution to trigger or remote control complete circuit loads or fixtures, that may not have a direct connection to an existing switch or a switch without a neutral wire.
FlatPac Modules are for any hardwire application which requires high voltage switching through high or low voltage input wires. The FP’s provide a convenient way to interface with any maintained dry contact closure or to sense 120VAC, to control other SWX receivers. They were designed to be mounted in a ballast tray or electrical box.
Receivers are the workhorses of SimpleWorx and are available in a variety of styles; wall switches, plug-in, fixture and flatpac versions. Each version replaces an existing wall switch or attaches to a fixture to enable a transmitter to remotely control it. Each receiver can be linked to eight transmitters. Most receivers will handle a 20A load.
The SimpleWorx Sunrise Sunset Timer (SST) features an astronomical clock which is capable of turning landscape transformers and other 120VAC Devices ON and OFF based on one of the ten preset daily schedules
SimpleWorx Wall Switches replace existing switches, provide fingertip, local control of present lighting, while adding the capability of being remotely controlled by other SWX transmitters over the electrical wiring.
Plug-in Modules are remote devices for controlling plug loads, such as lamps and appliances up to a 15A load or that need a dry contact input without the need for control wires from a SimpleWorx transmitter.
Fixture Modules are small wire-in self-contained devices, which are an ideal solution to remote control complete circuit loads or fixtures, which may not have a direct connection to an existing switch or a switch without a neutral wire.
The FlatPac Modules are designed to be flexible enough to control almost any lighting or motor load up to 20A. Two types are availabele, 120V or Contact output. The AC version contains one heavy-duty relay intended to control an entire 20A circuit powering any fluorescent fixtures, pumps, fans, motors, motorized damper controls and landscape transformers.
Additional products you might find useful.
Load Controls are the answer to "What do you want to control?" The PulseWorx system delivers the most extensive range of UPB-compatible plug-in and wire-in load control wall switches, dimmers, keypads,and modules on the market today. Enabling you to remote control practically any device that connects to the electrical powerline.
Additional products you might find useful. Lighting Control Panels, Screwless Wall Plates